Pyrotect Pro Air Flow Vortex Forced Air Full Face Helmet - Duckbill
Shipping calculated at checkout
Pyrotect’s Pro Airflow All NEW SA2020 redesigned Tri-Weave composite helmets are unmatched by the competition. The Pro Airflow SA2020 helmets come with a unique six pad interior system which allows for resizing the helmet for a perfect fit along with corrugated ridges which allows for better heat transfer to keep you cooler and reduce fogging. The Pro Airflow helmets are vacuumed bagged and autoclave cured for superior helmet strength and durability while keeping the helmet as light as possible.
Your choice of left side or mid forced air configuration.
- Designed with a Tri-Weave Composite Vacuum bagged & autoclave cured light weight shell for maximum durability
- Stainless Steel hardware and a Kevlar chinstrap
- New Head Liner air channel design for better adjustability, added comfort, and improved air flow
- True Fit removable six pad headliner & cheek pad system for cleaning and easy resizing for a perfect fit
- Snap it front latch for positive and secure shield closure and easy opening
- .125″ Polycarbonate shield with a three stage pivot positioning system with tear off post
- Rubber eye port seal
- Large eye port offers greater visibility
- M6 inserted for head neck restraint devices
- Fire retardant Nomex interior
- Great aerodynamics. The duckbill (chin spoiler) improves aerodynamics and can reduce lift and buffering in open cockpit cars.
- Compatible with Racing Optics or Ultra Shield tear offs
- Snell SA2020 rated
- Sizes 2XS to 3XL
- Product Weight from 3.4lb – 3.6lb
Understanding Fire Suit Ratings
The following is from the SFI Foundation. Please check with your sanctioning body to ensure compliance before buying any piece of safety equipment.
The driver suit spec 3.2A tests a garment’s fire retardant capabilities. The spec contains a rating system based on the garment’s capability to provide Thermal Protective Performance (TPP) in the presence of both direct flame and radiant heat. The purpose of the TPP is to measure the length of time the person wearing the garment can be exposed to a heat source before incurring a second degree, or skin blistering, burn.
The TPP rating is the product of exposure heat flux and exposure time. The TPP results can be converted to the time before a second degree burn occurs. The higher the garment rating, the more time before a second degree burn. Here are the SFI ratings with the corresponding TPP values and times to a second degree burn:
| SFI Rating | TPP Value | Time to 2nd Degree Burn |
|---|---|---|
| 3.2A/1 | 6 | 3 Seconds |
| 3.2A/3 | 14 | 7 Seconds |
| 3.2A/5 | 19 | 10 Seconds |
| 3.2A/10 | 38 | 19 Seconds |
| 3.2A/15 | 60 | 30 Seconds |
| 3.2A/20 | 80 | 40 Seconds |
Another test included in the spec is the after-flame test. When a direct flame is applied the fabric and them removed, the time it takes the material to self-extinguish is measured. This is called after-flame time and it must be 2.0 seconds or less for the layer of fabric to pass. Cuff material is also subjected to this test.
The flammability test evaluates single layers of fabric only. The individual layers of a multiple-layer suit are tested for after-flame time separately.
The TPP test can be used to evaluate multiple-layer configurations as well as single-layer fabrics. The samples used in testing are assembled with the identical fabrics and layer order as an actual driver suit.
Other tests required by Spec 3.2A include thread heat resistance, zipper heat resistance, and multiple layer thermal shrinkage resistance.
